Panasonic KX-TDA600 Feature Manual page 201

• If an extension user sets Walking Extension at the same time that the extension's data is being
programmed through PC programming, the data may not be transferred properly. (→ 1.20.2 Walking
Extension)
Installation Manual References
KX-TDA50
2.5.7 RMT Card (KX-TDA5196)
3.1 Overview
3.2 Connection
3.3 Installation of the Hybrid IP-PBX PC Programming Software
KX-TDA100/KX-TDA200
2.3.1 MPR Card
2.3.3 RMT Card (KX-TDA0196)
2.6.6 CTI-LINK Card (KX-TDA0410)
3.1 Overview
3.2 Connection
3.3 Installation of the KX-TDA Maintenance Console
KX-TDA600
2.3.1 EMPR Card
2.3.3 RMT Card (KX-TDA0196)
2.8.7 CTI-LINK Card (KX-TDA0410)
3.1 Overview
3.2 PC Connection
3.3 Installation of the Maintenance Console
Programming References
PC Programming Manual
2.18.1 [11-1] Main
→ RS-232C—External Modem Command—Automatic Initialization
→ RS-232C—External Modem Command—Manual Initialization 1–Manual Initialization 5
→ Remote
→ Password—System Password - PC Programming—User Level
→ Password—System Password - PC Programming—Administrator Level
→ Password—System Password - PC Programming—Installer Level
PT Programming Manual
[801] External Modem Control
[810] Remote Programming
[811] Modem Floating Extension Number
[812] ISDN Remote Floating Extension Number (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual References
1.4.5 DID (Direct Inward Dialing)
1.4.6 DIL (Direct In Line)
1.13 P
Feature Manual 201