Panasonic KX-TDA600 Feature Manual page 331

the call to the VM group and dial the mailbox number of the desired extension with the required
command (after the VPS answers the call). Therefore the caller can leave a message without
knowing the mailbox number.
2.11.5 [4-1-4] Wired Extension—Flexible Button
→ Type
→ Ext. No. / Floating Ext. No. (for Voice Mail Transfer)
2.11.13 [4-2-3] Portable Station—Flexible Button
→ Type
→ Ext. No. / Floating Ext. No. (for Voice Mail Transfer)
2.11.17 [4-3] DSS Console
→ Type
→ Ext. No. / Floating Ext. No. (for Voice Mail Transfer)
[Performance of Pressing the VM Transfer Button and Entering an Extension Number]
In AA Service Mode
Switching to VM command + Recording
message command (#6 + H [H = Mailbox No.])
[Example]
CO Line Call
PBX
Extension
(Operator)
d)
Listening to a Recorded Message
If the VPS receives a message, the VPS will set the Message Waiting feature on the corresponding
telephone to notify the extension user that there is a message waiting in his mailbox. The Message
button light of the extension will turn on (→ 1.11.3 Message Waiting), thereby notifying the
extension user that there is a message waiting in his mailbox. When the Message button light turns
on, pressing the button allows the extension user to play back the messages stored in his mailbox
without dialing such as a mailbox number. It is programmable whether the PBX or the VPS cancels
the Message Waiting feature (e.g., turning off the Message button light).
→ 2.10.21 [3-8-1] VM(DTMF) Group—System Settings—Others—Message Waiting Lamp Control
When the PBX is selected, the Message Waiting feature is canceled after the extension user has
accessed the VPS. When the VPS is selected, the Message Waiting feature is canceled after the
extension user has listened to messages stored in his mailbox.
Transmitted Command
Recording message command (H [H = Mailbox
No.])
Sent "#6" + "103".
mailbox number
Switching to VM command
Transfer with VM Transfer
button + extension number (103)
VPS (In AA service mode)
VM Port 1
VM (DTMF)
Group
VM Port X
In VM Service Mode
VM Port 2
VM Port 3
Feature Manual
1.19 V
331