Panasonic KX-TDA600 Feature Manual page 271

[Ring Tone Pattern Table]
The ring tone pattern table is categorized into three parts, each containing a specified number of pattern
plans.
The ring tone pattern table is categorized as follows:
• Incoming CO Line Calls: each pattern plan can assign a ring tone pattern for each trunk group.
→ 2.9.14 [2-8-1] Ring Tone Patterns—Call from CO
• Incoming Doorphone Calls: each pattern plan can assign a ring tone pattern for each doorphone.
→ 2.9.15 [2-8-2] Ring Tone Patterns—Call from Doorphone
• Others: each pattern plan can assign a ring tone pattern for incoming intercom calls as well as ring
tones assigned to certain features (e.g., timed reminder).
→ 2.9.16 [2-8-3] Ring Tone Patterns—Call from Others
The ring tone patterns that arrive at an extension are determined by the pattern plan that is assigned to that
extension through system programming.
[Programming Example of Ring Tone Pattern Table]
CO Line Call/Hold
Intercom
Table
Call/Hold
No.
Recall
TRG1
1 Double Single
2 Single Double
: :
Conditions
• "PT Ring off Setting" can be enabled or disabled through system programming. If disabled, PT
users cannot turn incoming call ringing off for their extension.
• For the S-CO, G-CO, L-CO, ICD Group, INTERCOM, PDN and SDN buttons, one of 30 ring tones can
be assigned through personal programming.
Programming References
PC Programming Manual
2.9.14 [2-8-1] Ring Tone Patterns—Call from CO—Ring Tone Pattern Plan 1–8
2.9.15 [2-8-2] Ring Tone Patterns—Call from Doorphone—Ring Tone Pattern Plan 1–8
2.9.16 [2-8-3] Ring Tone Patterns—Call from Others—Extension—Ring Tone Pattern Plan 1–8
2.9.17 [2-9] System Options—Option 1—PT Operation—PT Ring Off Setting
2.11.1 [4-1-1] Wired Extension—Extension Settings
→ Option 1—Ring Pattern Table
→ Option 6—ICM Tone
2.11.5 [4-1-4] Wired Extension—Flexible Button—Optional Parameter (Ringing Tone Type Number) (for
Loop CO, Single CO, Group CO, ICD Group, SDN)
2.11.10 [4-2-1] Portable Station—Extension Settings—Option 1—Ring Pattern Table
2.11.17 [4-3] DSS Console—Optional Parameter (Ringing Tone Type Number) (for Loop CO, Single CO,
Group CO, ICD Group, SDN)
PT Programming Manual
None
Doorphone Call
Recall
TRG2 ... Port 1
Single
Double
: : : :
Timed
Reminder
Port 2 ...
: : :
1.15 R
External
Call Back LCS
Sensor
: :
Feature Manual
:
271