Panasonic KX-TDA600 Feature Manual page 286

1.16 S
[Example]
PBX
SVM Card 1: Floating Extension No. 591 (default)
Message Box for
Extn. 101
SVM Card 2: Floating Extension No. 592 (default)
Message Box for
Extn. 301
ESVM4 Card
An ESVM4 card can be used either for the SVM feature, for the OGM feature (→ 1.12.2 OGM (Outgoing
Message)), or both.
An ESVM4 card (4 channels) contains two separate blocks of data. Up to four ESVM cards (max. 16
channels) can be installed on each shelf of the PBX.
Only up to 2 cards (max. 8 channels) can be used for the SVM feature per system. In this case, each card
is assigned a floating extension number in the same way as an SVM2 card. The rest of the channels must
be used for OGM feature purposes.
When using an ESVM4 card for the SVM feature, it must be mounted on sub-slot 3 (highest slot) of the
OPB3 card.
[Example]
PBX
SVM Card 1 (ESVM4): Floating Extension No. 591 (default)
Block A
Message Box for
Extn. 101
Block B
Message Box for
Extn. 104
SVM Card 2 (SVM2): Floating Extension No. 592 (default)
Message Box for
Extn. 301
Message Recording Limit
Up to 125 (SVM2)/250 (ESVM4) messages (greeting messages and voice messages for extensions) with a
maximum total recording time of 60 minutes (default) can be recorded per card/block. This memory is
shared between the message boxes of all extensions assigned to that card/block. The recording quality,
which can be selected through system programming, determines the total recording time as follows:
286 Feature Manual
Message Box for Message Box for
Extn. 102 Extn. 103
Message Box for
Message Box for
Extn. 102
Extn. 103
Message Box for
Extn. 105
2 CH
Message Box for
Extn. 210
2 CH
2 CH
Message Box for
Extn. 210
2 CH
2 CH