Panasonic KX-TDA600 Feature Manual page 41

Light pattern
Slow red flashing
Off
• Call Park (Automatic Park Zone) Button
Pressing the Call Park (Automatic Park Zone) button parks a call in an idle parking zone automatically.
Any flexible button can be customized as the Call Park (Automatic Park Zone) button.
• Call Park Retrieve Deny
Internal Call Block (→ 1.9.14 Internal Call Block) also determines which extensions' calls an extension
user can retrieve from a parking zone, i.e., if extension 101 cannot call extension 201, then it cannot
retrieve extension 201's parked calls either.
Programming References
PC Programming Manual
2.9.4 [2-3] Timers & Counters
→ Recall—Call Park Recall
→ Recall—Disconnect after Recall
2.9.8 [2-6-1] Numbering Plan—Main—Features—Call Park / Call Park Retrieve
2.11.5 [4-1-4] Wired Extension—Flexible Button
→ Type
→ Parameter Selection (for Call Park)
→ Optional Parameter (Ringing Tone Type Number) (for Call Park)
2.11.13 [4-2-3] Portable Station—Flexible Button
→ Type
→ Parameter Selection (for Call Park)
→ Optional Parameter (or Ringing Tone Type Number) (for Call Park)
2.11.17 [4-3] DSS Console
→ Type
→ Parameter Selection (for Call Park)
→ Optional Parameter (Ringing Tone Type Number) (for Call Park)
PT Programming Manual
None
Feature Manual References
1.6.3 Flexible Buttons
2.1 Capacity of System Resources
Operating Manual References
1.3.6 Call Hold
A call is parked in the preset parking zone
There are no parked calls
Status
1.3 C
Feature Manual 41