Clear Channel Alerting Mode; Radio-Kill; Memory Speed Dial Programming - Motorola GP68 Installation And Operation Manual

Model ST-865M3 SmarTrunk II ™ Logic Board
38
Clear channel alerting mode notifies the subscriber when
a radio channel becomes available.
To program the Clear Channel Alerting feature: Enter
the program code 24 followed by the # key, and then
either 1 (enable) or 0 (disable) followed by the # key.
Example: To enable Clear Channel Alerting press:
2 4 # 1 #.
Note: 24 # 0 # disables this function
This programming code is used to reactivate a Portable
Radio that has been remotely disabled with the Radio-
Kill function from the ST-852M.
Example: To re-activate a Portable Radio press:
2 5 # 0 #.
This program code controls a subscriber's ability to
program speed dial numbers. If enabled, the subscriber
can program speed dial numbers using the Portable
Radio's keypad. If it is disabled, the subscriber can not
program speed dial numbers. This does not prevent a
subscriber from speed dialing if numbers have been
programmed. The System Operator/Manager can pre-
program some memory speed dial numbers for the sub-
scriber, and then disable the Memory Speed Dial Pro-
gramming. The subscriber can then call the System
Operator/Manager's programmed numbers.
To program the Memory Speed Dial Programming fea-
ture: Enter the program code 26 followed by the # key,
and then either 1 (enable) or 0 (disable) followed by the
# key.
Example: To disable Memory Speed Dial
Programming press: 2 6 # 0 #.