Switches, Indicators And Connectors (Full-Wide Blade) - Hitachi Compute Blade 500 Series System Overview Manual

Location
Notes:
1 When using the USB port of KVM cable except keyboard and mouse, you should use
.
the device with a rated maximum current limit 500 mA per two ports, or the USB
device that can be external powered.
2 When POWER LED starts blinking from lighting solid, release the button. If you press
.
the power switch for six seconds or more, the power may turn on after forced turn-
off. If so, check that HDD access LED is not illuminated, and then press and hold the
power button for four seconds or more.
3 Error cannot be displayed while from pressing the power button until turning on the
.
main power.

Switches, Indicators and Connectors (Full-wide blade)

Name
Figure 1-20 Server Blade
System Overview
Hitachi Compute Blade 500 Series System Overview Guide
State
MIS Amber-On
TEMP Amber-On
MEM Amber-On
STOP BP Amber-On
CPU1 Amber-On
CPU2 Amber-On
Description
Unsupported combination
of the DIMM, CPU, and
HDD.
The maximum temperature
limit was exceeded.
A memory failure was
detected.
SAS Backplane failure was
detected.
CPU1 failure was detected.
CPU2 failure was detected.
1-17