Hitachi Compute Blade 500 Series System Overview Manual page 64

Items
Security
QoS
Management
CEE (Converged
Enhanced Ethernet)
High availability
Table 2-27 Brocade 8 Gb/sec Fibre Channel Switch Module specifications
Items
FCSW component
Fibre channel ports
Supported line speeds
Total bandwidth
Fabric latency
Fibre channel
specification
Maximum frame size
Data traffic
Media type
Scalability
Console / management ports
2-18
IGMP V2/V3 snooping, Storm Control
ACLs (standard, VLAN-based, Port-based), IEEE 802.1X,
Radius, TACACS+
8 Class Queue, CoS, Priority Queue, DWRR
telnet, ftp, IPv4 SNMP (v1/v2), Ping, tracert, Cisco like CLI
Priority-based Flow Control(PFC) – IEEE 802.1Qbb
Enhanced Transmission Selection (ETS) – IEEE 802.1Qaz
Data Center Bridging eXchange (DCBX) – IEEE DCB
Function associated with LAN controller redundancy (failover association),
hot-plug replacement,
configuration backup
Supported standards Fibre channel specification
Service classes
Hitachi Compute Blade 500 Series System Overview Guide
Specifications
Specifications
Brocade 5460
Minimum:
12 ports, internal and/or external, assigned as desired.
Maximum:
16 internal ports (Serdes interfaces to the server blades)
6 external ports
2.125 Gb/sec line speed, full duplex,
4.25 Gb/sec line speed, full duplex,
8.5 Gb/sec line speed, full duplex
374 Gb/sec
22 ports x 8.5 Gb/sec (line speed) x 2 (full duplex)
700 ns (8 Gb/sec with cut-through routing)
Class 2, class 3, class F
2112 byte payload
Unicast, multicast, broadcast
8 Gb SFP+, LC connector, short-wave laser
Maximum distance:
500 m at 1 Gb/sec; 300 m at 2 Gb/sec;
150 m at 4 Gb/sec; 50 m at 8 Gb/sec
Full fabric architecture with up to 239 switches
10/100 Ethernet (RJ-45)
Serial port (RS-232C)
Specification