Power Supply Module Specifications - Hitachi Compute Blade 500 Series System Overview Manual

Items
Scalability
Console / management ports
Fabric service
Hardware options
Operation management
Power supply
External dimensions (W x D x H: mm)
Mass

Power Supply Module Specifications

The following table provides the power supply module specifications.
Items
Input Nominal supply voltage
Permissible supply voltage variation 89-132/178-264 Vac (Continuous)
Frequency
Current
Efficiency
2-20
•
•
•
Full fabric architecture with up to 239 switches
10/100 Ethernet
Serial port (RS-232C)
In-band through the management module
Standard Fabric service
Optional Ports On Demand (POD)
(at additional Fabric Vision
charge)
ISL Trunking
SFP+ (for adding one external port)
SNMPv1, SNMPv3, syslog, telnet, http, ftp
12 V
161 x 252 x 32.3
1.5 kg (including SFP+)
Table 2-29 Power Supply Module specifications
Hitachi Compute Blade 500 Series System Overview Guide
Specifications
Multi-mode 50 μm cable (OM2)
150 m at 4 Gb/sec; 50 m at 8 Gb/sec; 35 m at 16 Gb/sec
Multi-mode 50 μm cable (OM3)
380 m at 4 Gb/sec; 150 m at 8 Gb/sec; 100 m at 16
Gb/sec
Multi-mode 50 μm cable (OM4)
400 m at 4 Gb/sec; 190 m at 8 Gb/sec; 125 m at 16
Gb/sec
Specifications
100-127 Vac
200-240 Vac
80-138/160-276 Vac (500 ms)
50/60 Hz (±3 Hz)
12 A (Nominal), 13.5 A (500 ms maximum)
84 % at 10 % load
90 % at 20 % load
94 % at 50 % load
91 % at 100 % load
Specification