Setting Forced Power Off Order For Server Blades; Power Supply Module Optimization - Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual

Displaying the chassis power history

Setting forced power off order for server blades

The management module forces power off the server blades to maintain the
power for remaining server blades when the power consumption exceeds the
available supply power because of the failure of power supply modules. You
can set the forced power off order from the management module Web
console.
The default order is sever blade #7, #6, #5, #4, #3, #2, #1 and #0.
Displaying/setting forced power off
order

Power supply module optimization

Power supply module optimization statically optimizes the number of power
supply modules to activate according to that of server blades to be operated
so that the power supply modules can work efficiently. This function is
enabled in default. The LEDs of inactive power supply modules blink in green
while the function is enabled.
Displaying power supply
module optimization
Setting power supply module
optimization
Displaying the function status
Enabling/disabling the function
Hitachi Compute Blade 500 Series Management Module Setup Guide
Table 2-110 CLI console operation
Item
Table 2-111 Web console operation
Item
Table 2-112 Web console operation
Item
Resources tab > Systems > Power management
Resources tab > Systems > Power management >
Action button > Edit power supply module
optimization
Table 2-113 CLI console command
Item
Functional detail
show log power
Operation
Resources tab > Systems > Power
management
Operation
Command
show power ps-module
Set power ps-module
Operation
2-227