Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 359

ID
[Meaning] The port numbers for the LPAR manager function were recovered from port
duplication.
<X> indicates the location, and <Y> indicates the event that occurred.
[Action] No particular action required.
FFC0 Info
[Meaning] The management module issued a connection request to the HCSM.
[Action] No particular action required.
FFC1 Info
[Meaning] The connection between the management module and HCSM is established.
[Action] No particular action required.
FFC2 Info
[Meaning] This message is an alert for confirming connection between the management
module and HCSM.
[Action] No particular action required.
FFC3 Info
[Meaning] A Smart Configure process is begun in the server blade indicated by X. Y
indicates the type of smart configuration being performed.
acquisition: Smart Configure for acquiring information from a server blade
setting: Smart Configure for setting information on a server blade
diagnosis: Smart Configure for testing a server blade
[Action] No particular action is required.
FFC4 Info
[Meaning] Smart configuration is succeeded on the server blade at the part shown in X.
Y indicates the type of smart configuration being performed. (See the message ID:
FFC3)
[Action] No particular action required.
FFC5 Info
[Meaning] Smart configuration is failed on the server blade at the part shown in X. Y
indicates the type of smart configuration being performed. (See the message ID: FFC3)
[Action] Other alert message appeared for indicating the reason for failure. Follow the
procedure in this alert message.
FFCA Info
[Meaning] The IP address of the management module has been changed.
[Action] No particular action required.
Hitachi Compute Blade 500 Series Management Module Setup Guide
Level
Description
Management Module sent a connection
request alert.
Management Module sent a connection
establishment alert.
Management Module sent a keep-alive
alert.
On <X>, smart configure started (Data Y
procedure).
On <X>, smart configure succeeded
(Data Y procedure).
On <X>, smart configure failed (Data Y
procedure).
The IP address of the management
module changed.
HCSM alert log message
Message
A-15