Each Module Configuration; Configurable Modules From Management Module - Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual

Each module configuration

This section describes configuration of each module in the system unit.

Configurable modules from management module

The management module, the server blade, the switch module, and others
are installed in the system unit. You need to set these modules configuration
for system construction and operation. You can set these modules
configuration by the management module console in the system unit. You can
also link to these module consoles by the management module console.
Therefore, you can set each module configuration seamlessly without
connecting each console when connecting the management module console.
The following table describes the configurable module items from the
management module console.
Server blade (BMC)
configuration
Server blade (UEFI)
configuration
LPAR manager configuration
Hitachi 1 Gb/sec LAN switch
module (20-port)
configuration
Hitachi 1 Gb/sec LAN switch
module (40-port)
configuration
Hitachi 1/10 Gb/sec LAN
switch module configuration
Brocade 10 Gb/sec LAN
switch module configuration
Brocade 8 Gb/sec Fibre
Channel switch module
configuration
Brocade 16 Gb/sec Fibre
Channel switch module
configuration
Hitachi Fibre Channel
mezzanine card
configuration
2-50
Hitachi Compute Blade 500 Series Management Module Setup Guide
Table 2-63 Configurable module items from Web console
Configuring from
Item the management
module console
Functional detail
Linking to
the target
module
Y
Y (partly)
Y (partly)
Y (partly)
Y (partly)
Y (partly)
-
-
-
Y
Remarks
- -
- -
- For details, see
LPAR manager
cooperation
function on page
2-110.
- -
- -
- -
- -
Y -
-
1
Y
- -