Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 360

FFCB
[Meaning] The module information has been changed. X indicates the module name.
[Action] No particular action required.
FFCC
[Meaning] The module information has been changed. X indicates the module name.
[Action] No particular action required.
FFCD
[Meaning] The device information has been changed.
[Action] No particular action required.
Messages in the table above are shown when you use the management
module firmware version A0150 or later and SEL dictionary version A0067 or
later. With firmware earlier than A150 or SEL dictionary earlier than A0067,
some messages are different from those above.
A-16
Hitachi Compute Blade 500 Series Management Module Setup Guide
ID Level
Info
Info
Info
HCSM alert log message
Description
Module information of <X> changed.
Module information (constitution setting)
of <X> changed.
System information changed.
Message