Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 222

• Do not change the firmware file name. If the file name is changed, the
management module cannot recognize it as a firmware file.
• Files for other system units, such as that for CB 2000, cannot be applied.
Installing LPAR manager firmware to management module
[Management module firmware version A0135 or earlier]
LPAR manager firmware can be installed to only the bank which is not
assigned to any server blade.
[Management module firmware version A0145 or later]
LPAR manager firmware can be installed on only the bank which is not
assigned to any server blade or when server blades that are assigned to the
bank are all powered off.
1 Click Resources.
.
2 Click Systems > Firmware.
.
2-198
Hitachi Compute Blade 500 Series Management Module Setup Guide
Functional detail