Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 352

[Action] No particular action required.
FD85
[Meaning] Power of server blade at the part shown in X is inhibited. The problem may be
caused by following reasons:
Construction and setting have problem. (Combination of hardware is invalid/power
shortage)
Working state of maintenance. (Power operation for maintenance module/failure
module)
[Action] Eliminate the course of inhibition. If you cannot find course, consult your
reseller or maintenance personnel.
FD90
[Meaning] A server blade at the part shown in X is powered on.
[Action] No particular action required.
FD91
[Meaning] A server blade at the part shown in X is powered off.
[Action] No particular action required.
FD92
[Meaning] A server blade at the part shown in X is reset.
[Action] No particular action required.
FD93
[Meaning] A server blade at the part shown in X is failed to power-on.
[Action] Consult your reseller or maintenance personnel.
FD9C
[Meaning] A switch module at the part shown in X is powered on.
[Action] No particular action required.
FD9D
[Meaning] A switch module at the part shown in X is powered off.
[Action] No particular action required.
FD9F
[Meaning] A switch module at the part shown in X is failed to power-on.
[Action] Consult your reseller or maintenance personnel.
FDA8
[Meaning] A power supply module at the part shown in X is powered on.
[Action] No particular action required.
A-8
Hitachi Compute Blade 500 Series Management Module Setup Guide
ID Level
WARNING
Info
Info
Info
FAIL
Info
Info
FAIL
Info
HCSM alert log message
Description
On server, power-on is inhibited.
(Location:X)
Server is powered on.(Location:X)
Server is powered off.(Location:X)
Server is reset.(Location:X)
Server failed to power-on.(Location:X)
Switch module is powered on.
(Location:X)
Switch module is powered off.
(Location:X)
Switch module failed to power-on.
(Location:X)
Power supply is powered on.(Location:X)
Message