Hcsm Discovery; Hcsm Options - Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual

Note:
• HTTPS must be enabled in HCSM linkage. See
HTTPS settings and how to change them.
• When Security strength is set to high or when Security strength is set to
default and communication is enabled only with TLS 1.2, connection with
HCSM not supporting TLS 1.2 is not available. See HCSM instruction
manuals for the operation.
• When the port number used for HTTPS communication is changed from
443 in the HCSM setting, change the port number used for the
management module to the same number as HCSM. To change the port
number used for the management module, change the port number for
HTTPS, which is a service provided by management modules.

HCSM discovery

HCSM has a feature, hereinafter referred to as Discovery, to detect system
units in the managed network. System administrator can add all system units
in the network to managed resources by executing Discovery with HCSM user
interface. When specifying system units as managed resources, HCSM
registers itself into the management module of the system units. You can find
HCSM information registered on the management module using Discovery on
the Web console and CLI console.
Tip: When four HCSMs have been registered in a management module, the
system unit with the management module cannot be a target if you execute
Discovery on HCSM other than that registered in the management module.
HCSM information and settings
Showing HCSM information
Setting HCSM information
Deleting HCSM information

HCSM options

This subsection describes option settings for management modules to link to
HCSM.
By configuring the network for management modules, and then discovering
and adding resources by using the HCSM user interface, you can link the
Hitachi Compute Blade 500 Series Management Module Setup Guide
Table 2-77 Web console operation
Item
Table 2-78 CLI console operation
Item
Functional detail
Security on page 2-26
Operation
Administration tab > HCSM
Operation
show hcsm setting
set hcsm manager
delete hcsm manager
for
2-67