Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 357

ID
FF2B FAIL
[Meaning] A failure which is subject to delayed failover by the N+M cold standby function
occurred on the server blade indicated by X. The affected server blade will now fail over
to its counterpart in the standby system.
[Action] Contact your sales or service representative.
FF40 Warning
[Meaning] The scheduling mode of a NIC allocated to an LPAR was changed.
<X> indicates the location, and <Y> indicates the event that occurred.
[Action] LPAR manager has shifted to the safe mode. Confirm the NIC allocation to
LPARs, change the setting of allocation to LPARs if required, and then release the safe
mode.
FF41 FAIL
[Meaning] An failure event was detected on the specified management NIC.
<X> indicates the location, and <Y> indicates the event that occurred.
[Action] If the location is "-", no action is required.
If the location is other than "-", do the following:
(1) Confirm that the specified management NIC is correct.
(2) If no problem is found in (1), confirm whether a NIC that supports the shared mode
is installed on the indicated location.
FF42 Warning
[Meaning] A warning event was detected on the specified management NIC.
<X> indicates the location, and <Y> indicates the event that occurred.
[Action] If the location is "-", no action is required.
If the location is other than "-", do the following:
(1) Confirm that the specified management NIC is correct.
(2) If no problem is found in (1), confirm whether a NIC that supports the shared mode
is installed on the indicated location.
FF43 Information
[Meaning] LPAR manager started on the LPAR manager management NIC specified by
the user.
<X> indicates the location.
[Action] None.
Hitachi Compute Blade 500 Series Management Module Setup Guide
Level
Description
On <X>, a failure requiring a failover
occurred.
The scheduling mode for a NIC assigned
to an LPAR was changed.(Location:<X>,
Event:<Y>)
An failure event on a management NIC
was detected.(Location:<X>,
Event:<Y>)
A warning event on a management NIC
was detected.(Location:<X>,
Event:<Y>)
LP started, with the specified ports set as
the LP management NIC ports.
(Location:<X>)
HCSM alert log message
Message
A-13