Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 40

Module
Server blade
Switch module
Connection procedure,
displaying VLAN
Connection procedure,
Displaying VLAN
Connection procedure,
Setting VLAN
Deleting VLAN
Connecting management interface from MGMT1
The system unit has connection ports, MGMT0 and MGMT1, for the
management interface. You can select which connection port is assigned for
each module. For examples, you can set the following configurations.
• The management module connects to MGMT0, and the server blades and
switch modules connect to MGMT1. The network is separated clearly
according to the managed entities.
• The server blades #0-3 connect to MGMT0, and the server blades #4-7
connect to MGMT1 for load balancing.
2-16
Hitachi Compute Blade 500 Series Management Module Setup Guide
Default setting
Connection from
MGMT0
Connection from
MGMT0
Table 2-23 Web console operation
Item
Resources tab > Systems > Network > Management
LAN > VLAN tab
Table 2-24 CLI console command
Item
Functional detail
Note
-
Except Brocade 10 Gb/sec DCB switch
module, switch modules cannot connect
from MGMT0 since the management
interface is assigned to the internal
network.
Operation
Command
show network vlan
set network vlan
delete network vlan