Administrator Password - HP StoreEver MSL2024 User And Service Manual

Figure 70 OCP menu

Administrator password

TIP: By default, the administrator password is unset; all of the digits are null. You must set the
administrator password from the OCP to protect the administrator functions on the OCP and
enable the administrator functions in the RMI.
The administrator password grants access to all OCP functions except the Service area. A user
without knowledge of the administrator password can access:
Info: Status, Identity Library, Identity Drives, Inventory, and Network
Configuration: Display Contrast
Operations: Open Mailslots, Inventory, and Enable Password Locks
All other Configuration, Operations, and Support options are locked.
After five minutes of inactivity, the OCP returns to the splash screen. To access
password-protected tasks, you must reenter the administrator password.
The administrator password is originally null. Hewlett Packard Enterprise strongly recommends
that you assign a password during the installation process, see
116 Operating the tape library
"Changing the administrator