Configuration; Configuring Logical Libraries (Status/Information > Set Logical Libraries); Changing The Administrator Password (Configuration > Change Admin Password) - HP StoreEver MSL2024 User And Service Manual

4. For IPv4 Network or IPv6 Network, press Enter and then use Previous or Next to access
the network addresses and configuration.

Configuration

The Configuration menu provides access to the following configuration functions:
"Configuring logical libraries (Status/Information > Set Logical Libraries)" (page 96)
"Changing the administrator password (Configuration > Change Admin Password)" (page 96)
"Setting the number of reserved slots (Configuration > Set Reserved Slot Count)" (page 97)
"Configuring the mailslot (Configuration > Configure Mailslot)" (page 97)
"Bar code reporting format (Configuration > Barcode Format Reporting)" (page 97)
"Changing the SCSI address — parallel SCSI drives (Configuration> Change Drive)"
(page 98)
"Changing the drive configuration — Fibre Channel drives (Configuration> Change Drive)"
(page 98)
"Setting the master drive (Configuration > Set Master Drive)" (page 99)
"Setting behaviors (Configuration > Library behavior)" (page 99)
"Setting the date and time (Configuration > Library Date/Time)" (page 100)
"Configuring network settings (Configuration > Configure Network Settings)" (page 101)
"Configuring automatic cleaning (Configuration > Configure Auto Cleaning)" (page 102)
"Restoring factory defaults (Configuration > Restore Defaults)" (page 102)
"Saving and restoring the library configuration (Configuration> Save/Restore Configuration)"
(page 103)
To access the Configuration menu:
1. From the Home screen, press Previous or Next until the screen displays Configuration.
Press Enter to select.
2. Press Previous or Next until the screen displays your selected function. Press Enter to
select.
Configuring logical libraries (Status/Information > Set Logical Libraries)
Use Set Logical Libraries to configure a two-drive tape library into one or two logical libraries.
Access to this feature requires the administrator password. For more information about logical
libraries, see
To change the administrator password:
1. From the Home screen, press Previous or Next until the screen displays Configuration.
Press Enter to select.
2. Press Previous or Next until the screen displays Set Logical Libraries. Press Enter to
select.
3. Enter the administrator password if prompted.
4. Press Previous or Next to scroll through the display until the desired number of logical
libraries is displayed, then press Enter.
Changing the administrator password (Configuration > Change Admin Password)
Use Change Admin Password to set or change the administrator password. Once the
administrator password is set, you must know the administrator password or the service password
to change the administrator password. Passwords consist of exactly eight numbers each between
the values of 0 and 9.
96 Operating the tape library
"Logical libraries" (page 18).