Configuration Change Events - HP StoreEver MSL2024 User And Service Manual

Configuration change events

Table 41 Configuration change events
Value Configuration event
0x41 Drive SCSI changed
0x42 Library SCSI changed
0x43 Drive enable
0x44 Drive disable
0x45 Master drive assigned
0x46 Drive sled added
0x47 Drive sled removed
0x48 Library mode changed
0x49 Element address
0x4A Net parameter
0x4B Slots reserved
0x4C Mailslot support
0x4D Admin password
0x4E Date/time set
0x4F Barcode format
0x50 Default config set
0x51 FW upgrade library
0x52 FW upgrade drive
0x53 Auto-clean feature set
0x54 Drive FC parameters
0x55 Power supply added
0x56 Key server token was removed
0x57 Key server token was inserted
0x58 Encryption has been enabled
0x59 Encryption has been disabled
0x60 Extender unit has been inserted
0x61 Extender unit has been removed
0x62 Extender unit has been enabled
0x63 Extender unit has been disabled
0x64 Library door lock status change
0x65 Hostname has been changed
0x66 Database has been restored from robot
0x67 Serial number has been changed
Description
Drive SCSI ID has changed
Library SCSI ID changed (*)
Drive was enabled
Drive disabled
Drive master assigned
Drive sled added
Drive sled removed
Library mode changed (automatic, sequential,
random)
Element address changed
Network parameter has changed
Slots reserved
Mailslot support
Admin password has changed
Date and time of RTC set
Barcode format alignment changed
Default configuration set
Library firmware was upgraded
Drive firmware was upgraded
Auto-cleaning switched on or off
Drive Fibre Channel parameters changed
A power supply was added to the system
A key server token was removed
A key server token was inserted
Encryption has been enabled
Encryption has been disabled
The library extender has been inserted
The library extender has been removed
The library extender has been enabled
The library extender has been disabled
The status of the library door lock has changed
Hostname has been changed
The library configuration has been restored from
the robot
The serial number has been changed
Configuration change events 181