See the description of each BGA for details.
Check Table tab
If a consistency error is detected during redundancy check and the error cannot be repaired, the
error is registered in the Check Table tab.
Check Table Type
#
Table Type
Start Logical Block Address
Count
3.5.10 Spare Drives
If you click the Spare Drives icon in the Tree View, the information on spare drives appears in
the Management Window.
Information tab
The Information tab indicates the status of the spare drives being set.
Create tab
For the Create tab, see "3.15.1 Creating a spare drive."
Delete tab
For the Delete tab, see "3.15.2 Deleting a spare drive."
3.5.11 Logical Drive Summary
The Logical Drive Summary indicates the information on all logical drives below the controller
collectively. The displayed contents are the same as those appearing when you click a specific
logical drive below disk arrays.
All: Indicates all error types.
Read Check: Lists read errors.
Write Check: Lists write errors.
Inconsistent Block: Lists inconsistent blocks detected by
redundancy check.
No.
Type of Read Check, Write Check or Inconsistent Block
LBA of first block
Number of successive blocks starting from the above LBA
-
-
30