3. Specify the following.
Source Physical Drive
Target Physical Drive
4. Click [Submit].
PDM is started. It may take much time depending on the capacity.
During the execution of PDM, you can check the progress.
5. When the processing is completed, the status display of source HDD becomes "Stale,PFA"
and the icon in the Tree View is marked with a red cross (×). It is recommended to replace the
HDD with a normal one.
Specify the physical drive which is suspected to be defected
and from which data is desired to be copied.
Specify a physical drive to which data is to be copied.
-
-
54