NEC EXPRESS5800 User Manual page 44

The progress of the redundancy check appears in the Background Activities tab. If you click the
link of the displayed task being advanced, the current progress status appears. On the screen,
you can pause or stop the task.
You can see the Progress bar.
NOTES:
If you try to provide a logical drive not full-initialized
after its creation with redundancy check in the Auto
Fix mode for the first time, the following message is
registered. However, this does not have bad influences
on system processing.
Redundancy check is started on
unsyncronized logical drive (event
ID:1547).
After redundancy check is completed, be sure to see
the event log to check whether one or more errors
occur during the redundancy check. If a media error
occurred, a message indicating the occurrence appears
before the message showing that the redundancy
check is completed without any problem.
If rebuild is done for a logical drive at a time when
redundancy check of the logical drive is previously
scheduled, the redundancy check is skipped.
While redundancy check is run to a logical drive, a
time when another scheduled redundancy check is to
be run to the logical drive may come. If so, the
scheduled redundancy check is skipped.
If the power is off at a time when redundancy check is
scheduled previously, the scheduled redundancy check
is skipped.
- -
39
Click