Section 11 Incoming Ring Groups; Figure 4-16 Standard View Incoming Ring Groups - NEC UNIVERGE SV9100 Programming Manual

ISSUE 2.0
S 11 I
ECTION NCOMING
This screen combines system data relevant to the feature "Incoming Ring Groups".

Figure 4-16 Standard View Incoming Ring Groups

To setup up an Incoming Ring Group:
1.
2.
3.
SV9100 PC Programming Manual
R G
ING ROUPS
For each trunk, specify the Incoming Ring Group of which it will be a member.
Alternatively, route the call from the trunk to a voice mail type. Individual
settings can be applied to each Night Mode.
These settings are linked with 22-05.
Select the incoming Ring Group to which the trunks and extensions are
assigned. You can use the right and left arrows to select the previous or next
Ring Group (1~100).
Select the extensions that are members of the Incoming Ring Group.
These settings are linked with 22-04.
1) Place each trunk
in a Ring Group or set
the trunk to terminate
on voice mail instead
of a Ring Group.
2) Select the Ring
Group.
3) Select which
extensions are in the
Ring Group.
4-27