ISSUE 2.0
4.
5.
6.
SV9100 PC Programming Manual
Define the Intercept Ring Group calls that are forwarded during this Night
Mode.
Specify the Intercept Ring Group to use by the Table Area during the selected
Night Mode.
Specifies if the call, during the selected Night Mode, is directed toward an
Incoming Ring Group or voice mail. This setting only applies when the option is
enabled in the associated DID Translation Table entry. This setting is linked
with 22-12.
Select the Trunk Groups that use the Table Area during the selected Night
Mode.
This section lists the Trunk Groups that use the Table Area for DID during the
selected Night Mode. These settings are linked with 22-13.
Specify the DID settings for the selected Trunk Group.
The basic setup details for the Trunk Group DID settings are selected in this
section. These settings are linked with 22-09.
4-21