Using A Standard View Screen; Card Configuration - NEC UNIVERGE SV9100 Programming Manual

ISSUE 2.0
2.2
S 3 C
ECTION ARD
The screen represents a conceptual model of the chassis and the blade packages
within it. To obtain blade details download the configuration from the chassis. The
blade slots display the blade types (these are the blades that can be inserted in the
selected slot), the telephone/trunk port range (these are the ports used by the blade)
and firmware version (firmware being used by the blade). By default, all blade slots
displayed as white indicating no blade has been installed in that slot.
On this screen, you can right mouse click on the desired slot. A popup menu is
displayed indicating the configurable options for that slot. Once you have selected
the blade that is installed in that slot, the blade name is displayed on the front of the
slot location.
Refer to
for the layout of the Card Configuration screen.
SV9100 PC Programming Manual

Using a Standard View Screen

Each Standard View screen works differently. However the following common
methods apply:
1. Select the Standard View screen from the Standard View menu
relevant to the desired task.
2. Modify settings on the screen.
3. Press the Apply button to save the changes.
The method in modifying settings for each screen is explained in the help
menu.
The remainder of this chapter discusses the individual options available from
the Standard View submenu.
C
ONFIGURATION
Figure 4-3 Standard View Card (Blade) Configuration Screen on page 4-4
4-3