Advertisement
Installation of Remote Controller Batter
Operating Guideline
General Procedures:
1.
Switch on the power and press ON/OFF key to start the air conditioner.
2.
Press MODE key to select your desired run mode.
3.
Press SWING key to enable the guide louver to swing at a specific angle. Press it again to stop the
swing.
4.
Press FAN key to set the fan speed.
5.
Press +/- key to set your desired temperature.
Optional Procedures:
6.
Press SLEEP key from remote controller to set the sleep mode.
7.
Press AUTO ON/OFF key and then press +/- key to set the timer.
Note: When auto mode is selected, the air conditioner will automatically select an appropriate run mode
according to the indoor temperature, making the environment comfortable.
Replacement of Remote Controller Battery
Two pieces of 7# alkali dry batteries are used in the remote controller.
1. Slide the battery cover of remote controller downward. Remove the old batteries and replace with two
pieces of new batteries (Take care that the polarity shall be correct)
2. Close the battery cover of remote controller.
Note:
Do not use new batteries together with old
batteries, or use different types of batteries
together.
To avoid leakage of liquid and damage to the
remote controller, please take out the batteries
if you will not use the remote controller in
several weeks.
Operate the remote controller within effective
range.
Keep the remote controller at least 1 meter
away from television set or sound equipment.
－24－
Battery cover
RESET key
Insert two 7# batteries.
Advertisement
