Advertisement
Operating Procedures / Photos
Disassemble Axial Flow Fan
Use spanner to twist off the nut of the fan and
remove the fan.
(Fig 8-68)
Disassemble Outdoor Motor
Screw off the four tapping screws fixing the
motor, pull out the motor lead-out cable plug,
and remove the motor. Screw off the two
tapping screws fixing the motor support, and
pull the motor support upward to remove it.
(Fig 8-69)
Disassemble 4-Way Valve
Screw off the holding nut of the 4-way valve
coil and remove the coil. Use wet cotton cloth
to wrap the 4-way valve, unsold the four
soldering points connecting the 4-way valve,
and remove the 4-way valve. Be quick during
the unsoldering process, pay attention to
keep the wrapping cloth wet and do not allow
the soldering flame to burn the compressor
lead-out cable. (Fig 8-70)
Nut
Nut
Motor
Screw Fixing the Motor
Motor Support
Fixing Screw
4-Way Valve
－42－
Advertisement
