Operating Procedures / Photos
Disassemble Bearing Mounting Plate
Use screwdriver to screw off the four screws
at the bearing mounting plate. (Fig 8-20)
Disassemble Motor
Use screwdriver to screw off the screw shown
in the figure to remove the motor clamp and
the motor fixing hoop. (Fig 8-20)
Use screwdriver to screw off the screw at the
motor mounting plate to remove the motor
mounting plate sub-assy.
8-21).
Disassemble Motor Mounting Plate Sub-assy
(refer to Figure
(Fig 8-20)
Motor
Mounting
Plate
Sub-assy
-29-
Screw
Screw
(Fig 8-20)
Screw
(Fig 8-21)