2.8.32 [1-1] Slot—Port Property - DID Port—Connection
Command
Commands for the DID ports can be programmed.
INS
Puts the port in service.
Value Range
Not applicable.
Maintenance Console Location
2.8.32 [1-1] Slot—Port Property - DID Port—Connection Command
Programming Manual References
2.8.31 [1-1] Slot—Port Property - DID Port
Feature Guide References
None
OUS
Takes the port out of service. This enables a temporary non-use of the port, for example, for the
purpose of repair.
Value Range
Not applicable.
Maintenance Console Location
2.8.32 [1-1] Slot—Port Property - DID Port—Connection Command
Programming Manual References
2.8.31 [1-1] Slot—Port Property - DID Port
Feature Guide References
None
2.8 [1] Configuration
PC Programming Manual
301