Panasonic KX-TDA100 Pc Programming Manual page 694

2.12 [5] Optional Device
Feature Guide References
None
DISA Cyclic Tone Option—Tone On Maximum Time
Specifies the maximum duration of the cyclic tone that will be recognised by the PBX. When the tone
sent from the telephone company is shorter than the value set here, the PBX recognises it as a tone-
on.
Note that this option can only be set when DISA Cyclic Tone Detection on this screen is set to
"Option".
To apply changes to this setting, follow the steps below:
1.
Change this setting.
2.
Set the status of the MSG card (KX-TDA30) or OPB3 card (KX-TDA100/KX-TDA200/KX-
TDA600) to "OUS", then "INS".
Value Range
10 × n (n=11–400) ms
Maintenance Console Location
2.12.3 [5-3-1] Voice Message—DISA System
Programming Manual References
2.8.1 [1-1] Slot
2.8.41 [1-1] Slot—Card Property - OPB3 (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Guide References
None
DISA Cyclic Tone Option—Tone Off Maximum Time
Specifies the maximum time that the PBX waits for a cyclic tone to be sent from the telephone
company before recognising it as a tone-off. When no tone is detected within the time set here, the
PBX recognises it as a tone-off.
Note that this option can only be set when DISA Cyclic Tone Detection on this screen is set to
"Option".
To apply changes to this setting, follow the steps below:
1.
Change this setting.
2.
Set the status of the MSG card (KX-TDA30) or OPB3 card (KX-TDA100/KX-TDA200/KX-
TDA600) to "OUS", then "INS".
Value Range
10 × n (n=11–400) ms
Maintenance Console Location
2.12.3 [5-3-1] Voice Message—DISA System
Programming Manual References
2.8.1 [1-1] Slot
694 PC Programming Manual