2.8.42 [1-1] Slot—Card Property - OPB3—Card Command (KX-
TDA100/KX-TDA200/KX-TDA600 only)
Commands for the service cards installed on the OPB card can be programmed.
INS
Puts the card in service.
Value Range
Not applicable.
Maintenance Console Location
2.8.42 [1-1] Slot—Card Property - OPB3—Card Command (KX-TDA100/KX-TDA200/KX-TDA600
only)
Programming Manual References
None
Feature Guide References
None
OUS
Takes the card out of service.
Value Range
Not applicable.
Maintenance Console Location
2.8.42 [1-1] Slot—Card Property - OPB3—Card Command (KX-TDA100/KX-TDA200/KX-TDA600
only)
Programming Manual References
None
Feature Guide References
None
Pre-INS
Assigns the card type to a certain sub-slot (Pre-installation).
Value Range
MSG4: 4-Channel Message Card
DPH4: 4-Port Doorphone Card
DPH2: 2-Port Doorphone Card
2.8 [1] Configuration
PC Programming Manual
327