1-1] Slot-Card Property - Dph Type-Connection Command (Kx-Tda30 Only) - Panasonic KX-TDA100 Pc Programming Manual

2.8 [1] Configuration
2.8.46 [1-1] Slot—Card Property - DPH type—Connection
Command (KX-TDA30 only)
Commands for the DPH ports can be programmed.
INS
Puts the port in service.
Value Range
Not applicable.
Maintenance Console Location
2.8.46 [1-1] Slot—Card Property - DPH type—Connection Command (KX-TDA30 only)
Programming Manual References
2.8.45 [1-1] Slot—Card Property - DPH type (KX-TDA30 only)
Feature Guide References
None
OUS
Takes the port out of service. This enables a temporary non-use of the port, for example, for the
purpose of repair.
Value Range
Not applicable.
Maintenance Console Location
2.8.46 [1-1] Slot—Card Property - DPH type—Connection Command (KX-TDA30 only)
Programming Manual References
2.8.45 [1-1] Slot—Card Property - DPH type (KX-TDA30 only)
Feature Guide References
None
336 PC Programming Manual