Panasonic KX-NCP0158 Quick Installation Manual page 11

Maximum Number of CSs Supported by PBX
Notice
The CSs are for connection to specified Panasonic PBXs only.
The following number of CSs can be supported by each PBX.
KX-NCP500/KX-NCP1000
KX-TDE600
Required Distances between Equipment
CAUTION
Maintain the distances listed below between equipment in order to prevent noise, interference or the
disconnection of a conversation. (The distance may vary depending on the environment.)
CS and office equipment such as a computer, telex, fax
machine, etc.
CS and PS
Each CS
Each PS
PBX and CS
Notice
If multiple CSs cover the same area, the phone connection may become noisy or the number of possible
simultaneous calls with PSs may decrease due to interference between the CSs. For details, refer
to "5 Site Survey Using the KX-TCA175/KX-TCA255/KX-TCA256/KX-TCA275/KX-TCA355/KX-TD7590
—Testing the Radio Signal Strength".
The required distance between CSs may vary depending on the environment of the installation site and
conditions in which the wireless system is used. Conduct a site survey to determine the appropriate
distance.
RF Specification
Radio Access Method
Frequency Band
Number of Carriers
Carrier Spacing
Bit Rate
Carrier Multiplex
PBX
Equipment
Item
Connected via
LAN
More than 2 m
More than 1 m
More than 3 m
More than 0.5 m
More than 2 m
MultiCarrier TDMA-TDD
1880 MHz to 1900 MHz
10
1728 kHz
1152 kbps
TDMA, 24 (Tx12, Rx12) slots per frame
Maximum Number
KX-NCP0158
8
16
Distance
Description
Quick Installation Guide
1 Overview
11