Registering Ip Cell Stations - Panasonic KX-NCP0158 Quick Installation Manual

8 Registering IP Cell Stations

Registering the IP-CS
Note
When using a traditional CS in the same area, connect it to the PBX first, as Master CS1, and then register
IP-CSs.
1. Connect the PC to the PBX with an Ethernet straight cable or RS-232C cross cable.
2. Click Connect from the programme launcher.
3. a.
Select your PBX model from PBX Model.
b.
Select the LAN or RS-232C tab, depending on the type of PC connection with the PBX.
c.
Specify the settings as required.
d.
Enter the system password for installer (default: 1234).
CAUTION
To avoid unauthorised access and possible abuse of the PBX, we strongly recommend:
a.
b.
c.
e.
Click Connect.
4. a.
Under Configuration, click Slot.
b.
For the KX-NCP500/KX-NCP1000, move the
mouse pointer over the PBX image of IPCMPR
Virtual Slot at the top of the screen, and click
Select Shelf. For the KX-TDE600, move the
mouse pointer over the white PBX image of
IPCEMPR Virtual Slot at the bottom of the screen,
and click Select Shelf. Move the mouse pointer
over the V-IPCS4 card. A menu will be shown
under the mouse pointer.
c.
Click Port Property.
5. Click Registration.
A dialogue box will appear. Non-registered (available)
IP-CSs are displayed on the left.
Keeping the password secret.
Changing your password regularly.
Selecting a complex, random password that cannot be easily guessed.
8 Registering IP Cell Stations
Quick Installation Guide 45