Panasonic KX-NCP0158 Quick Installation Manual page 54

10 Registering Portable Stations
PS Registration
[690]
ENTER
Using the KX-TCA175/KX-TCA275
When the PS has not been registered yet
When registering the PS for the first time, it is possible to select the desired language for the display. (You do
not need to enter the PS system programming mode when registering for the first time.)
Press
POWER for
2 seconds.
When the PS has already been registered to another PBX
One PS can be registered to a maximum of 4 different PBXs.
Press POWER
for 2 seconds.
If required
System Lock Password
Using the KX-TCA155/KX-TCA255/KX-TCA256/KX-TCA355
Press POWER
for 2 seconds.
Select
"Register H/set".
"Enter Base PIN".
Using the KX-TD7590
After PS registration, it is possible to set a 4-digit system lock password to prevent unauthorised access to PS
system settings. When system lock is enabled, the system lock password will be required to access PS system
settings.
54 Quick Installation Guide
PS No.
Extn. No.
001 to max. no.
1 to 5 digits
of PSs (3 digits)
If required
Select the desired
language.
Select
"Setting Handset".
4 digits
Select
"Register H/S".
"Please wait".
C.Tone
Select
"Setting Handset".
Select
"Base 1–4".
PIN for PS Registration
4 digits
To the PS
operation
below
ENTER
C.Tone C.Tone
Press "F"
for 2
seconds.
Select
"System Option".
Select
"Base 1–4".
Select
"Registration".
"Please wait".
C.Tone
END
(HOLD)