Hiding The Local Video - Huawei TE40 User Manual

HUAWEI TE40&TE50&TE60 Videoconferencing Endpoint
User Guide
Figure 8-1
status. For example, the local and remote presentation icons are displayed only when the
following conditions are met:
l
l
The icon for the local presentation disappears if the local presentation source is disconnected
from the endpoint. The icon for the remote presentation disappears if the remote presentation
sharing stops.

8.4 Hiding the Local Video

During a conference, you can hide the video of your site if you do not want the video to be seen
by remote sites. When this function is enabled, the video of your site is displayed as a blue screen
at remote sites.
Background
The endpoint is in use during a conference.
Procedure
Step 1 Choose Advanced Settings > Utilities > Hide Video. When prompted, confirm that you want
to enable the function for hiding the local video.
Step 2 Select Save.
After the function for hiding the local video is enabled,
corner of the video in full screen depending on your configurations.
----End
Issue 02 (2014-01-15)
is for your reference. Icons displayed in the rectangle vary according to endpoint
A presentation source is connected to your site. When this happens, the icon for the local
presentation is displayed.
Your site receives a presentation shared by a remote site. When this happens, the icon for
the remote presentation is displayed.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Controlling What You See
may be displayed in the lower right
40