Maintenance; Recommended Maintenance Schedule - Toro 04383 Greensmaster 3250-D Operator's Manual

Traction unit
Hide thumbs Also See for 04383 Greensmaster 3250-D:
Table of Contents

Advertisement

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule

Maintenance Service
Interval
After first 8 hours
After first 50 hours
Every 50 hours
Every 150 hours
Every 200 hours
Every 800 hours
Every 2000 hours or 2
years
Important
Refer to your engine operator's manual for additional maintenance procedures.
If you leave the key in the ignition switch, someone could accidently start the engine and
seriously injure you or other bystanders.
Remove the key from the ignition and disconnect the wire from the spark plug before you do any
maintenance. Set the wire aside so that it does not accidentally contact the spark plug.
Maintenance Procedure
• Check the fan/alternator belt tension.
• Replace the hydraulic oil filter.
• Check the engine RPM (at idle and full throttle)
• Change the engine oil and filter.
• Check the battery electrolyte level.
• Check the battery cable connections.
• Service the air filter.
• Lubricate all grease fittings.
• Check the fan/alternator belt tension.
• Change the engine oil and filter.
• Replace the air filter element.
• Torque the wheel lug nuts.
• Replace the hydraulic oil.
• Replace the hydraulic oil filter.
• Check the engine RPM (idle and full throttle)
• Replace the fuel filter/water separator canister.
• Replace moving hoses.
• Drain/flush the fuel tank.
• Drain/flush the hydraulic tank.
• Drain/flush the cooling system.
Caution
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents