Table of Contents
Advertisement
1.26
Weight and Dimensions
Wheel Base:
Working Width:
Cutting Width:
Transport Width:
Overall Length:
Overall Height:
Working Weight:
Recommended Lubricants and Hydraulic Fluids
Grease Points:
Engine:
Hydraulic System:
Ambient Temperature Range
0 - 30̊ C (32 - 86̊ F)
ISO viscosity grade
46 hydraulic oil
Should you be in any doubt please contact your TORO dealer. Using incorrect grades will cause premature wear
of hydraulic components and invalidate warranty.
Cutterdecks
Cutterdeck Width:
Cutting Width:
Cutterblade Length:
Cutterblade Speed:
Cutterblade Overlap:
Height of Cut:
Number of Blades:
Configuration:
Breakback Mechanism:
Tyres:
SPECIFICATIONS
1610 mm (63.4˝)
3610 mm (142.1˝) - At 100mm (4˝) height of cut
3500 mm (137.8˝) - At 100mm (4˝) height of cut
1774 mm (69.8˝) - At 50mm (2˝) height of cut
3470 mm (136.6˝)
1750 mm (68.9˝) with R.O.P.S folded
2404 mm (94.6˝) with R.O.P.S in its vertical operating position
Including 2 post R.O.P.S, cutterdecks and full tank of fuel. It excludes the
operator and any other options.
1869 kg (4120 lb)
A good quality medium grease
Refer to Engine Operators Manual
15 - 40̊ C (59 - 104̊ F)
ISO viscosity grade
68 hydraulic oil
Centre Cutterdeck
1675 mm (65.9˝)
1600 mm (63˝)
558 mm (22˝)
2400 rpm approx
63 mm (2.5˝)
26 mm (1˝) to 127 mm (5˝)
3
Semi-floating
-
Puncture preventative
1.26
Left/Right Cutterdeck
1150 mm (45.3˝)
1090 mm (42.9˝)
558 mm (22˝)
2400 rpm approx
40 mm (1.6˝)
26 mm (1˝) to 127 mm (5˝)
2
Fully floating
Gas spring
Puncture preventative
Advertisement
Table of Contents
