1.23
Cutterdeck Drive System
Drive Type:
Pump:
Delivery Rate:
Cutterdeck Motors:
Control:
Relief Valve Setting:
Cutterdeck Lift System and Steering
Drive Type:
Pump:
Delivery Rate:
Steering:
Cutterdeck Lift Control:
Relief Valve Setting:
Hydraulic System
Hydraulic Oil Type:
Capacity:
Cooling:
Suction Line Filtration:
Return Line Filtration:
Transmission Filtration:
Maximum Oil
Contamination Level:
Maximum Oil Temperature:
SPECIFICATIONS
Hydraulic
Tandem hydraulic gear type
45.3 Litres per minute - All decks (10 UK gallons per minute)
Hydraulic motors, pressure balanced with integral differential pressure
sensing relief check valve. Direct drive to cutterdecks
Electro-hydraulic
Automatic diverter valve safety cut-off
250 bar (3625 psi) differential
Hydraulic
Hydraulic gear pump with integral relief valve
11 litres per minute (2.9 UK gallons per minute)
Power beyond hydrostatic steering valve with priority flow to steering and
auxiliary flow to cutterdeck lift system. Manual emergency steering.
Mechanical hydraulic
120 bar (1523 psi) on pump
Refer to RECOMMENDED LUBRICANTS AND HYDRAULIC FLUIDS
77 Litres (17 UK gallons)
Combined aluminium oil and water cooler
125 micron no bypass mesh filter
10 micron with 2 bar (29 psi) bypass check valve
10 micron no bypass pressure filter
ISO Code 18/13 or better (ISO 4406)
1300 particles / ml < 15 μ
40 to 80 particles / ml > 15 μ
95̊ C (203̊ F)
1.23