Cab Controls - Toro 31236 Operator's Manual

Fuel Gauge
The fuel gauge (Figure 7) indicates the amount of fuel
remaining in the fuel tank.
1. Fuel gauge

Cab Controls

3
2
1
9
1. Air-recirculation control
2. Fan control
3. Temperature control
4. Windshield-wiper switch
Air-Recirculation Control
Sets the cab to either recirculate the air in the cabin or to draw
air into the cabin from outside
•
Set it to recirculate the air when using the air-conditioning.
•
Set it to draw air in when using the heater or fan.
Fan-Control Knob
Rotate the fan-control knob to regulate the speed of the fan
(Figure 8).
Figure 7
2. Fuel-tank cap
4
8
g028431
7
Figure 8
5. Power outlet
6. Lights switch
7. Flashers switch
8. Air-conditioning switch
(Figure 8).
Temperature-Control-Knob
Rotate the temperature-control knob to regulate the air
temperature in the cab
Windshield-Wiper Switch
Use this switch to turn the wind shield wipers on or off
(Figure 8).
Power Outlet
Use this 15 A, 12 V DC power outlet to power compatible
devices (Figure 8).
Lights Switch
Use this switch to turn the headlights and taillight on or off
(Figure 8).
Flashers Switch
Use this switch to turn the flashers (hazard lights) on or off
(Figure 8).
Air-Conditioning Switch
Use this switch to turn the air conditioning on or off
8).
5
Windshield Latch
6
Lift up the latches to open the windshield
the latch to lock the windshield in the open position. Pull out
and down on the latch to close and secure the windshield.
1. Windshield latch
Rear Window Latch
Lift up the latches to open the rear window. Press in the latch
to lock the window in the open position. Pull out and down
on the latch to close and secure the window
Important: You must close the rear window before
opening the hood; otherwise, damage may occur.
14
(Figure 8).
(Figure
Figure 9
(Figure
(Figure
9). Press in
9).