Cab Controls - Toro Groundsmaster 5900 Operator's Manual

Cab Controls

For Machines with a Cab
Figure 13
1. Air-conditioning switch
2. Air-recirculation control
3. Fan control
Air-Recirculation Control
The air-recirculation control sets the cab to either
recirculate the air in the cabin or to draw air into the
cabin from outside (Figure
•
Set it to recirculate the air when using the
air-conditioning.
•
Set it to draw air in when using the heater or fan.
Fan-Control Knob
Rotate the fan-control knob to regulate the speed of
the fan (Figure 13).
Temperature-Control-Knob
Rotate the temperature-control knob to regulate the
air temperature in the cab
Windshield-Wiper Switch
Use this switch to turn the windshield wipers on or
off (Figure 13).
Air-Conditioning Switch
Use this switch to turn the air conditioning on or off
(Figure 13).
Windshield Latch
Lift up the latches to open the windshield
14). Press in the latch to lock windshield to the O
4. Temperature control
5. Windshield-wiper switch
6. Blank switches for optional
kits
13).
(Figure 13).
(Figure
position. Pull out and down on the latch to close and
secure the windshield.
1. Windshield latch
g032672
Rear Window Latch
Lift up the latches to open the rear window. Press in
on the latch to lock the window in
out and down on the latch to close and secure the
window (Figure
Important:
Close the rear window before opening
the hood or damage may occur to the hood or rear
window.
PEN
24
Figure 14
OPEN
14).
g196911
position. Pull