Toro Groundsmaster 5900 Operator's Manual page 11

1. Warning—read the Operator's Manual.
2. Warning—do not operate this machine unless you are trained.
3. Warning—wear the seatbelt when seated in the operator's position.
4. Warning—wear hearing protection.
5. Thrown object hazard—keep bystanders away.
6. Cutting hazard of hand or foot—stay away from moving parts; keep all guards and shields in place.
7. Tipping hazard—lower the cutting unit when driving down slopes; slow the machine before turning; do not turn at high speeds.
8. Warning—engage the parking brake, shut off the engine, and remove the key before leaving the machine.
Note:
This machine complies with the industry standard stability test in the static lateral and longitudinal tests with the maximum
recommended slope indicated on the decal. Review the instructions for operating the machine on slopes in the Operator's Manual as
well as the conditions in which you would operate the machine to determine whether you can operate the machine in the conditions on
that day and at that site. Changes in the terrain can result in a change in slope operation for the machine.
1. Warning—read the Operator's Manual.
2. Warning—all operators should be trained before operating
the machine.
3. Warning—wear the seatbelt.
4. Warning—wear hearing protection.
117-2754
132-1322
5. Thrown object hazard—keep bystanders away.
6. Cutting/dismemberment hazard of hands or feet—stay away
from moving parts; keep all guards and shields in place.
7. Tipping hazard—lower the cutting unit when driving down
slopes; do not operate on slopes greater than 19°.
8. Warning—engage the parking brake, shut off the engine, and
remove the key before leaving the machine.
11
decal117-2754
decal132-1322