Lubrication
Greasing the Bearings and
Bushings
Service Interval: Every 50 hours—Lubricate all
grease fittings.
The machine has grease fittings that you must
lubricate regularly with No. 2 lithium grease. Also,
lubricate the machine immediately after every
washing.
Figure 81
Traction Unit
•
2 impact arms
•
2 front deck-lift-cylinder pivots
•
2 side deck-lift-cylinder pivots
•
4 steering-cylinder-ball joints
•
2 tie-rod-ball joints
•
2 king-pin bushings
•
1 rear axle-pivot bushing
Figure 80
g008855
65
(Figure
80)
(Figure
(Figure
(Figure
81)
(Figure
81)
(Figure
81)
(Figure
82)
Figure 82
80)
80)
g031674
g009249