Safety And Instructional Decals - Toro 74942TE Operator's Manual

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area of potential
danger. Replace any decal that is damaged or lost.
1. Warning—read the Operator's Manual for instructions on
torquing the blade bolt/nut to 115-149 N∙m (85-110 ft-lb).
1. Machine speed
2. Fast
3. Slow
1. Warning—do not touch or approach moving belts; remove
the ignition key and read the instructions before servicing
or performing maintenance.
93-7818
99-8936
4. Neutral
5. Reverse
106-2655
1. Warning—do not touch the hot surface.
1. Warning—there is no rollover protection when the roll bar is
down.
2. To avoid injury or death from a rollover accident, keep the
roll bar in the fully raised and locked position and wear
the seat belt. Lower the roll bar only when absolutely
necessary; do not wear the seat belt when the roll bar is
down.
3. Read the Operator's Manual; drive slowly and carefully.
8
106-5517
107-3069