Servicing The Engine-Oil - Toro 30487TC Operator's Manual

Important: Do not use a damaged filter.
Important: Do not apply pressure to the flexible center
of the filter.
Figure 35

Servicing the Engine-Oil

Checking the Engine-Oil Level
Service Interval: Before each use or daily
The engine is shipped with oil in the crankcase; however,
check the oil level before and after you first start the engine.
Check the oil level before operating the machine each day or
each time you use the machine.
The crankcase capacity is approximately 3.8 L(4 quarts) with
the filter. Use high-quality engine oil that meets the following
specifications:
•
API Classification Level Required: CH-4, CI-4 or higher.
•
Preferred oil: SAE 15W-40 (above 0°F (-17°C)
•
Alternate oil: SAE 10W-30 or 5W-30 (all temperatures)
Note: Toro Premium Engine oil is available from your
distributor in either 15W-40 or 10W-30 viscosity. See the
parts catalog for part numbers.
1. Park the machine on a level surface, lower the mower
deck, move the throttle lever to the S
shut off the engine, and remove the key from the
ignition switch.
2. Open the hood.
3. Check the engine oil
36
position,
LOW
Figure 36