ISSUE 3.0
2.
Remove the switch-hook from the unit. Turn the tab toward the top. Then slide the hook-switch
into position. Refer to
Hook-switch hanger
3.
Install two screws into a wall. The screw heads must be remained about 3 mm (0.12").
83.5 mm
(3.287)
4.
Mount the telephone on the wall.
Wall-mounting
holes
Hardware Manual
Figure 2-112 Hook-Switch Hanger on page
Figure 2-112 Hook-Switch Hanger
Figure 2-113 Wall-Mount Screw Guide
Figure 2-114 Mounting the Multiline Telephone
2-77.
Hook-switch hanger
3 - 4 mm
1 - 3 mm
(0.12 - 0.16)
(0.04 - 0.12)
7 - 9.5 mm
(0.28 - 0.37)
Minimum 10 mm (0.39)
SL1000
Wall side
2-77