SL1000
1.
Cut and remove specified Plastic Knockouts on the 008E-A1/000E-A1 PCB.
2.
Insert two Nylon-spacers into the specified holes. Using supplied screw, fasten Metal Spacer to
2BRIDB-C1 PCB.
3.
Mount the 2BRIDB-C1 PCB onto the 008E-A1/000E-A1 PCB using two Nylon-spacers and one
screw. (Refer to
Figure 2-72 Installing the 2BRIDB-C1 on page
4.
Attach the 2BRI Label to the specified position on the 008E-A1/000E-A1 PCB.
Nylon-Spacers
008E-A1/000E-A1 PCB
The 2BRIDB-C1 cannot be mounted on the 408M-A1/408E-A1/1PRIU-C1 PCB.
2-48
008E-A1
000E-A1
Figure 2-71 Plastic Knockouts on 008E-A1/000E-A1
J1
J3
Figure 2-72 Installing the 2BRIDB-C1
Plastic Knockout
Plastic Knockouts
2-48)
2BRIDB-C1 PCB
Screw
Metal-Spacer
Screw
ISSUE 3.0
2BRI Label
Installation