Loading The Customer Data; Figure 3-10 Inserting The Cf Card; Figure 3-11 Prg90-03 Display; Figure 3-12 Prg90-04 Display - NEC SL1000 Hardware Manual

ISSUE 3.0
For the details of PZ-VM21 daughter board installation, refer to
page 2-68.
1. Turn the system power off, insert the blank CF card (32 MB or larger) to the CF slot on PZ-VM21.
2. Turn the power on, enter the Program Mode then PRG90-03.
Program Mode
3. Dial 1 and press Hold key.
4. When the data backup to the CF card is completed, the display will be changed to the next PRG.
90-03-01
SavingSystemData
5. Remove the CF Card and exit from the Programming Mode.
The saved data on CF Card cannot be edited by the PC.

2.4 Loading the Customer Data

The backed up customer data can be loaded to the system by CF Card. The PZ-VM21 daughter board
must be installed to the CPU card with a CF card inserted that the saved customer data loaded.
For the details of PZ-VM21 daughter board installation, refer to
page 2-68.
Hardware Manual
CF card

Figure 3-10 Inserting the CF card

Figure 3-11 PRG90-03 Display

Figure 3-12 PRG90-04 Display

Installing the PZ-VM21 PCB on
CPU card
CF Slot (CN2)
PZ-VM21 PCB
90-03-01
Data Save
,
90-04- M tenanc
Load Data
Installing the PZ-VM21 PCB on
SL1000
3-5